01-15-2021, 02:39 PM
I am having a issue getting the data for my custom gauges. The gauges show up fine. However there is no data. And when I go to any of the custom gauges I create the truck click and ticks, some dash lights flash or stay one, and the original gauges wont work until I turn off the ignition and turn it on again.
I got the PIDS from here:
7.3L PIDs for 2016 - Torque Pro and others. - Ford Truck Enthusiasts Forums (ford-trucks.com)
I put the PID in the Quary.
For example: openauto_obd_pids.ini (this is only part of it)
Did I do it correctly? I also tried all the PIDS without the 22 in the front as I thought I read something that somewhere where they said the 22 was not needed.
Any help would be appriciated.
I got the PIDS from here:
7.3L PIDs for 2016 - Torque Pro and others. - Ford Truck Enthusiasts Forums (ford-trucks.com)
I put the PID in the Quary.
For example: openauto_obd_pids.ini (this is only part of it)
#Boost
[ObdPid_12]
Query=221440
Formula=(((A*256)+B)*0.03625)-[221442]
#Exhaust Back Pressure
[ObdPid_13]
Query=221445
Formula=((A*256)+B)*0.03625
#Exhaust Back Pressure
#(Exhaust Gauge Pressure variation)
[ObdPid_14]
Query=221445
Formula=(((A*256)+B)*0.03625)-[221442]
#Exhaust Back Pressure
[ObdPid_15]
Query=221445
Formula=(((A*256)+B)*0.03625)-[221440]
#Fuel Injector Pulse Width
[ObdPid_16]
Query=221410
Formula=((A*256)+B)*.008
#Injector Control Pressure
[ObdPid_17]
Query=221446
Formula=((A*256)+B)*.57
#Injector Pressure Regulator
[ObdPid_18]
Query=221434
Formula=A*0.39063
#Engine Oil Temperature
[ObdPid_19]
Query=221310
Formula=(((A*256)+B)/100)-40
#Torque Converter Slip
[ObdPid_20]
Query=2211b8
Formula=((A*256)+B)/4
#Transmission Gear
[ObdPid_21]
Query=2211b3
Formula=A/2
#Transmission Fluid Temperature
[ObdPid_22]
Query=221674
Formula=((A*256)+B)/8
#Transmission Fluid Temperature From Pikachu
[ObdPid_23]
Query=2211BD
Formula=(((A*256)+B)*-0.0036)+212.98
Did I do it correctly? I also tried all the PIDS without the 22 in the front as I thought I read something that somewhere where they said the 22 was not needed.
Any help would be appriciated.