BlueWave Studio forum › OpenAuto Pro › OBD-II v
Extended OBD PIDs for Nissan

Current version of the OpenAuto Pro is 12
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Extended OBD PIDs for Nissan
TheBasedDoge Offline
Junior Member
**
Posts: 37
Threads: 3
Joined: Jun 2020
Reputation: 1
#11
08-14-2020, 11:28 PM
does it overwrite ? because i downloaded the full log and it has nothing else besides this, over and over


[2020-08-13 18:40:01.397120] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] retrying connection to recent device.
[2020-08-13 18:40:01.397143] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] trying connect to recent device, call handle: 0, recent address: FCBig GrinE:90:90:28:16
[2020-08-13 18:40:01.397174] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] recent device handle: 0x2326808
[2020-08-13 18:40:01.398616] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] connection to recent device finished, result: 2
[2020-08-13 18:40:01.398673] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] retrying connection to recent device.
[2020-08-13 18:40:01.398696] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] trying connect to recent device, call handle: 0, recent address: FCBig GrinE:90:90:28:16
[2020-08-13 18:40:01.398727] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] recent device handle: 0x2326808
[2020-08-13 18:40:01.400161] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] connection to recent device finished, result: 2
[2020-08-13 18:40:01.400192] [0xb0b08010] [info] [OpenAuto] [DeviceConnectionManager] retrying connection to recent device.
Find
Reply
BlueWave Online
Administrator
*******
Posts: 1,903
Threads: 63
Joined: Jun 2019
Reputation: 42
#12
08-14-2020, 11:35 PM (This post was last modified: 08-14-2020, 11:36 PM by BlueWave.)
Log file is deleted after each start of OpenAuto Pro application. If you did not restart the PI or OpenAuto Pro itself it should not be overwritten.
Find
Reply
TheBasedDoge Offline
Junior Member
**
Posts: 37
Threads: 3
Joined: Jun 2020
Reputation: 1
#13
08-14-2020, 11:36 PM
Ok, so i should try to pull them off while the obd screen is open then?
Find
Reply
BlueWave Online
Administrator
*******
Posts: 1,903
Threads: 63
Joined: Jun 2019
Reputation: 42
#14
08-14-2020, 11:52 PM (This post was last modified: 08-14-2020, 11:53 PM by BlueWave.)
(08-14-2020, 11:36 PM)TheBasedDoge Wrote: Ok, so i should try to pull them off while the obd screen is open then?

That will be okay. Basically just do not turn off the PI/OpenAuto Pro app before you copy log file with reproduced issue.
Find
Reply
TheBasedDoge Offline
Junior Member
**
Posts: 37
Threads: 3
Joined: Jun 2020
Reputation: 1
#15
08-14-2020, 11:52 PM
[2020-08-14 14:50:57.403808] [0x9843b140] [error] [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:50:57.403952] [0x9843b140] [error] [OpenAuto] [ObdDevice] query: 221114 response failed.
[2020-08-14 14:50:57.404030] [0x9843b140] [error] [OpenAuto] [ObdManager] read query: 221114 failed.
[2020-08-14 14:51:02.404496] [0x9843b140] [debug] [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:51:02.774296] [0x9843b140] [info] [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:51:02.774418] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:51:03.603678] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:51:03.615385] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:51:03.626582] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:51:03.637821] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:51:03.649084] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:51:07.447289] [0x9843b140] [info] [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:51:07.447391] [0x9843b140] [info] [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:51:07.447439] [0x9843b140] [info] [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:51:16.630858] [0x9843b140] [error] [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:51:16.630992] [0x9843b140] [error] [OpenAuto] [ObdDevice] query: 221111 response failed.
[2020-08-14 14:51:16.631076] [0x9843b140] [error] [OpenAuto] [ObdManager] read query: 221111 failed.
[2020-08-14 14:51:21.631503] [0x9843b140] [debug] [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:51:22.002498] [0x9843b140] [info] [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:51:22.002584] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:51:22.824955] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:51:22.839790] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:51:22.854744] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:51:22.868510] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:51:22.880997] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:51:26.734145] [0x9843b140] [info] [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:51:26.734269] [0x9843b140] [info] [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:51:26.734328] [0x9843b140] [info] [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:51:35.822591] [0x9843b140] [error] [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:51:35.822726] [0x9843b140] [error] [OpenAuto] [ObdDevice] query: 221106 response failed.
[2020-08-14 14:51:35.822808] [0x9843b140] [error] [OpenAuto] [ObdManager] read query: 221106 failed.
[2020-08-14 14:51:40.823247] [0x9843b140] [debug] [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:51:41.166600] [0x9843b140] [info] [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:51:41.166718] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:51:41.976503] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:51:41.988944] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:51:42.001420] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:51:42.012717] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:51:42.023905] [0x9843b140] [debug] [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:51:45.827006] [0x9843b140] [info] [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:51:45.827123] [0x9843b140] [info] [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:51:45.827182] [0x9843b140] [info] [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:51:56.297715] [0x9843b140] [error] [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:51:56.297837] [0x9843b140] [error] [OpenAuto] [ObdDevice] query: 22111F response failed.
[2020-08-14 14:51:56.297885] [0x9843b140] [error] [OpenAuto] [ObdManager] read query: 22111F failed.
Find
Reply
BlueWave Online
Administrator
*******
Posts: 1,903
Threads: 63
Joined: Jun 2019
Reputation: 42
#16
08-14-2020, 11:55 PM
Looks like your vehicle does not respond to the desired PID. What exact value of the mode and PID did you use in working app you mentioned?
Find
Reply
TheBasedDoge Offline
Junior Member
**
Posts: 37
Threads: 3
Joined: Jun 2020
Reputation: 1
#17
08-14-2020, 11:56 PM (This post was last modified: 08-15-2020, 12:07 AM by TheBasedDoge.)
[2020-08-14 14:50:57.403808] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:50:57.403952] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221114 response failed.
[2020-08-14 14:50:57.404030] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221114 failed.
[2020-08-14 14:51:02.404496] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:51:02.774296] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:51:02.774418] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:51:03.603678] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:51:03.615385] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:51:03.626582] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:51:03.637821] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:51:03.649084] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:51:07.447289] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:51:07.447391] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:51:07.447439] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:51:16.630858] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:51:16.630992] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221111 response failed.
[2020-08-14 14:51:16.631076] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221111 failed.
[2020-08-14 14:51:21.631503] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:51:22.002498] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:51:22.002584] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:51:22.824955] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:51:22.839790] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:51:22.854744] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:51:22.868510] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:51:22.880997] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:51:26.734145] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:51:26.734269] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:51:26.734328] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:51:35.822591] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:51:35.822726] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221106 response failed.
[2020-08-14 14:51:35.822808] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221106 failed.
[2020-08-14 14:51:40.823247] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:51:41.166600] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:51:41.166718] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:51:41.976503] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:51:41.988944] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:51:42.001420] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:51:42.012717] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:51:42.023905] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:51:45.827006] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:51:45.827123] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:51:45.827182] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:51:56.297715] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:51:56.297837] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 22111F response failed.
[2020-08-14 14:51:56.297885] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 22111F failed.
[2020-08-14 14:52:01.298228] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:52:01.642969] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:52:01.643071] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:52:02.464220] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:52:02.476523] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:52:02.487716] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:52:02.498994] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:52:02.510215] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:52:06.295919] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:52:06.296037] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:52:06.296097] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:52:15.451723] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:52:15.451839] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221183 response failed.
[2020-08-14 14:52:15.451909] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221183 failed.
[2020-08-14 14:52:20.452230] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:52:20.875719] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:52:20.875891] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:52:21.695702] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:52:21.708020] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:52:21.719287] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:52:21.730545] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:52:21.741752] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:52:25.537409] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:52:25.537526] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:52:25.537581] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:52:34.746969] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:52:34.747095] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221114 response failed.
[2020-08-14 14:52:34.747157] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221114 failed.
[2020-08-14 14:52:39.747498] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:52:40.039229] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:52:40.039302] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:52:40.857292] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:52:40.869546] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:52:40.882011] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:52:40.893276] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:52:40.904525] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:52:44.708012] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:52:44.708132] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:52:44.708190] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:52:53.922011] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:52:53.922139] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221111 response failed.
[2020-08-14 14:52:53.922199] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221111 failed.
[2020-08-14 14:52:58.922606] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:52:59.263681] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:52:59.263764] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:53:00.083757] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:53:00.096078] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:53:00.107314] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:53:00.118567] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:53:00.132322] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:53:03.929265] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:53:03.929363] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:53:03.929410] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:53:13.111721] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:53:13.111861] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221106 response failed.
[2020-08-14 14:53:13.111925] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221106 failed.
[2020-08-14 14:53:18.112393] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:53:18.429694] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:53:18.429816] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:53:19.242095] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:53:19.254386] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:53:19.265611] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:53:19.276876] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:53:19.288103] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:53:23.130014] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:53:23.130128] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:53:23.130183] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:54:27.240581] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:54:27.240725] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221114 response failed.
[2020-08-14 14:54:27.240786] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221114 failed.
[2020-08-14 14:54:32.241200] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:54:36.553052] [0x9843b140] [info]    [OpenAuto] [ObdDevice] initializing.
[2020-08-14 14:54:36.553176] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATZ
[2020-08-14 14:54:37.369457] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATE0
[2020-08-14 14:54:37.381764] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATS0
[2020-08-14 14:54:37.393003] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATL0
[2020-08-14 14:54:37.404258] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATH0
[2020-08-14 14:54:37.415511] [0x9843b140] [debug]  [OpenAuto] [ObdDevice] executing init command: ATSP0
[2020-08-14 14:54:41.198342] [0x9843b140] [info]    [OpenAuto] [ObdDevice] query available pids result: SEARCHING...4100BF9FB991
[2020-08-14 14:54:41.198464] [0x9843b140] [info]    [OpenAuto] [ObdDevice] activated.
[2020-08-14 14:54:41.198524] [0x9843b140] [info]    [OpenAuto] [ObdManager] device opened.
[2020-08-14 14:54:51.071507] [0x9843b140] [error]  [OpenAuto] [ObdDevice] max no data responses exceeded, count: 20/20
[2020-08-14 14:54:51.071632] [0x9843b140] [error]  [OpenAuto] [ObdDevice] query: 221111 response failed.
[2020-08-14 14:54:51.071691] [0x9843b140] [error]  [OpenAuto] [ObdManager] read query: 221111 failed.
[2020-08-14 14:54:56.072061] [0x9843b140] [debug]  [OpenAuto] [ObdManager] device is not active. Trying open.
[2020-08-14 14:55:01.200937] [0x9843b140] [error]  [OpenAuto] [ObdRfCommTransport] failed to connect, address: 00:1D:A5:14:A3:8B, channel: 1, error: 112, message: Host is down
[2020-08-14 14:55:01.201055] [0x9843b140] [info]    [OpenAuto] [ObdDevice] failed to open obd transport.
[2020-08-14 14:55:01.206232] [0x9843b140] [info]    [OpenAuto] [ObdManager] opening device failed. Retrying...
(08-14-2020, 11:55 PM)BlueWave Wrote: Looks like your vehicle does not respond to the desired PID. What exact value of the mode and PID did you use in working app you mentioned?

Used the same ones.

here is an example video of someone doing it with the 2211f oil temp

https://www.youtube.com/watch?v=8oc7szSr...=emb_title

If you compare with his video I think i have done the same thing. I also have it working on my same car with same adapter.
Ok, one thing I see different that openauto may not be doing?

OBD Header: 7e0
Diagnostic Start: 10c0

see at 1:13 of the video


I also see it referenced as 0x111F an another site
http://www.the370z.com/tuning/89695-370z...ids-9.html
Find
Reply
BlueWave Online
Administrator
*******
Posts: 1,903
Threads: 63
Joined: Jun 2019
Reputation: 42
#18
08-15-2020, 12:11 AM
Header can be added to the query. Do you know what diagnostic start/end command means? There is nothing regarding that in ELM327 documentation.
Find
Reply
TheBasedDoge Offline
Junior Member
**
Posts: 37
Threads: 3
Joined: Jun 2020
Reputation: 1
#19
08-15-2020, 12:14 AM
Where do i add the header? in front of the 2211f?

Apparently the 10c0 may be needed to have the ECM return results, this is what I am reading on another forum. It puts the ECM into a diagnostics session. I think this may be the issue then
Find
Reply
BlueWave Online
Administrator
*******
Posts: 1,903
Threads: 63
Joined: Jun 2019
Reputation: 42
#20
08-15-2020, 12:35 AM (This post was last modified: 08-15-2020, 12:56 AM by BlueWave.)
Value of the query is sent directly to the ELM327. Header should be added at the beginning of the query, e.g. 7E022111F. Actually, header is address of the desired ECU.

There is nothing regarding ECM sessions in ELM327 docs. It is not clear whether 10c0 should be part of the query, should be set via an AT command or as a separated PID query.

Could you please define custom PID with value of the query set to 10c0, Formula=a and add it as the Query_0 to your dashboard with custom PIDs?
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)